QUADRA-KLEAN
is
a liquid synthetic detergent concentrate designed for multi-purpose application.
It cleans practically any surface – - from glass to greasy parts. It is
highly alkaline for chemical “bite” to effectively remove the toughest
dirts, grimes, oils and greases. |
Economical
Highly concentrated, permitting up to
50% reduction in amount used compared to ordinary cleaners. It is uniform
and stable. Stays fresh. Doesn’t thicken. Its broad range of usefulness
cuts down cleaning inventory investment.
Powerful
- Versatile
Powerful “giant” which handles all industrial
cleaning needs. It is chemically engineered to remove stubborn soil from
most types of surfaces – - industrial equipment, floors, walls, and painted
surfaces. Effective in steam cleaners. Great for degreasing truck and car
motors and greasy floors.
Easy
To Use
Simply mix QUADRA-KLEAN
with
hot or cold water and the solution is easy to apply with mop, cloth, brush
or spray. Mix QUADRA-KLEAN with a solvent
to remove the toughest grime, such as deposits of oil and grease from concrete
floors or industrial equipment.
Biodegradable
Chemically engineered QUADRA-KLEAN
has
a light synthetic odor – stays fresh. It is BIODEGRADABLE – a highly important
feature where public water supplies are concerned. Many local governments
require cleaners used by industries to be biodegradable. This feature helps
eliminate FOAMING PROBLEMS in sewage treatment plants. Harmless to fish
and wildlife.
Powerful
QUADRA-KLEAN handles all your industrial cleaning needs!
For Fast and Easy
Cleaning Of . . . .
|
Walls
|
Machinery
|
Floors
|
|
Containers
|
Transports
|
Institutions
|
|
Steam Cleaning
|
Schools
|
Hotels
|
|
Service Stations
|
Buses
|
Newspaper Building Maintenance
|
|
Supermarkets
|
Rolling Stock
|
Commercial Buildings
|
|
Industrial Plants
|
Motels
|
Hospitals
|
How
To Use
|
USES
|
METHODS
|
ADVANTAGES
|
HAND WIPING
MACHINERY* |
Dilute 3 ozs. of QUADRA-KLEAN
in a gallon of hot or cold water. Hand wipe or spray on. Wipe off. |
Superior cleaning power
for pennies per gallon. Solution won’t sour if left on for a long period
of time. |
NEWSPAPER
BUILDING
MAINTENANCE* |
Mix 2 ozs. of QUADRA-KLEAN
to a gallon of clear water. |
Readily emulsifies “ink
mist.” Effectively cleans walls and floors. Fast, economical. |
| STEAM CLEANING |
Mix 1 part QUADRA-KLEAN
to 25 or more parts of cold water. Concentration depends on stubbornness
of soiled area. Add more QUADRA-KLEAN as needed. |
Safe on most types of
metal. Provides speedy wetting and penetrating action. |
MAINTENANCE OF FLOORS,
WALLS, BLACKBOARDS AND PAINTED
SURFACES* |
Dilute 1 oz. QUADRA-KLEAN
to a gallon of clear, clean water (hot or cold). For stripping most floor
finishes, mix at a ratio of 1 part QUADRA-KLEAN to 5 parts water. Let solution
set 10 minutes, but do not let it dry. Agitate with stiff bristle brush
or broom. Mop floor, then rinse with clean water and allow floor to dry. |
Superior cleaning at
less than eight cents per gallon. |
| CAR WASHING* |
Pre-rinse by hosing down
with plain water. Dilute 1 oz. of QUADRA-KLEAN to a gallon of clear water.
Use brush or swab. Hose rinse with clear water. |
No harm to expensive
car finish. Leaves bright, well-kept appearance. Virtually free rinsing. |
CONCRETE FLOORS WITH
HEAVY DEPOSITS OF OIL AND GREASE (Driveways, Runways, Loading Docks) |
Mix 1 part QUADRA-KLEAN
to 5 parts solvent.** (NOTE: Mix 1 gallon of solvent and 1 gallon of QUADRA-KLEAN
thoroughly. Then add remaining 4 gallons of solvent.) Let soak. Agitate
when necessary. Rinse with high pressure hose. One gallon of solution covers
approximately 150 sq. ft. |
Strong wetting, penetrating
and emulsifying action. Excellent rinsibility and water hardness control.
(When drain facilities are not available, remove excess solution with rubber-bladed
squeegee. Area may be mopped with clear rinse water.) |
HEAVY DUTY EQUIPMENT
WASHING |
Pre-rinse equipment to
be cleaned. Add 1 to 3 ozs. of QUADRA-KLEAN to each gallon of water, depending
upon soiled condition of equipment. Use cold or warm water. Apply mixture
of QUADRA-KLEAN and water to equipment. Agitate extremely soiled areas
with a brush or swab. Let solution soak for 5 to 10 minutes. Then rinse
equipment clean. |
No harm to most painted
surfaces. Dirt rinses away easily. An economical, effective cleaner |
CLEANING AND DEGREASING
INDUSTRIAL EQUIPMENT (Pumps, engines, compressors)
TRUCK AND CAR MOTORS |
Dilute 1 part QUADRA-KLEAN
to 5 parts solvent.** (NOTE: Mix 1 gallon of solvent and 1 gallon of QUADRA-KLEAN
thoroughly. Then add remaining 4 gallons of solvent.) Spray or brush solution
over entire surface. Let soak for 5 to 15 minutes. Rinse surface with water
hose and use air hose, if one is available, to blow off excess water. This
solution is COMBUSTIBLE. |
Light Solvent odor. Safe
on most metal parts. Unequaled wetting and penetrating action. Controls
lime and scale deposits. Let very hot surfaces (exhaust system) cool down
before application – works extremely well on warm motor surfaces. While
cleaning is in process, do not operate equipment. Equipment is ready to
use immediately after cleaning. |
* May be irritating to hands.
Rubber gloves should be worn.
** Solvent, such as kerosene, Stoddard
solvent, or naphtha.
|
